| Follow Us:

Entrepreneurship : Innovation + Job News

339 Entrepreneurship Articles | Page: | Show All

cincinnati pharmaceutical company developing new drug to treat ADHD

A small pharmaceutical development company is in the process of developing a new ADHD drug, which could net over $1 billion per year, if it makes it to market.
 
P2D Bioscience was started in 2005 by a former University of Cincinnati psychiatry professor, Dr. Frank Zemlan.

P2D partnered with Advinus, a drug discovery company based in Bangalore, India. The two companies are working on developing a drug, which was once used for cocaine addiction, to treat ADHD, but with fewer side affects and no addiction liability. 
 
ADHD is the most commonly diagnosed psychiatric disorder in children, with symptoms continuing into adulthood in up to 50 percent of cases. Recent estimates show that approximately 4.7 percent of American adults live with ADHD.

In the U.S. alone, the rate has grown from 12 per 1,000 children in the 1970s to 34 per 1,000 in the 1990s.
 
"This drug has a big advantage over similar drugs," says Zemlan, CEO of P2D. "Without the risk of addiction liability, there is potential for a huge market."
 
The drug was designed not to be addictive because it had been used for cocaine addicts. The drug has passed the first round of pre-clinical testing, and Zemlan says it will be able to begin testing on humans in eight to 12 months, if all goes as planned. Currently, the drug is undergoing safety tests.
 
"It's a big boom for Cincinnati to have drug development company based here," Zemlan says. "It gives a lot of opportunity for hiring high-tech and highly skilled employees." 
 
In its short existence, P2D has had great success and already has patents around the globe. Much of the work is through a partnership with the National Institute of Health, which is where P2D obtains many of its grants for research. 
 
"This year alone we have received $4.5 million in grants from the NIH," Zemlan says. "We hope to keep growing."
 
By Evan Wallis

eqed eyes growth as new solar microinverter makes solar more efficient

eQED is developing a solar microinverter that will improve the efficiency of solar panels. As with all solar panels, an inverter converts the output from the panel to AC power. Normal setups use one large inverter for an entire string of solar panels. eQED’s technology places one small inverter under each panel, increasing the amount of power gained from each solar panel.
 
The HIKARI microinverter provides improved energy harvesting, is more reliable than traditional inverters, and is easier to install and requires little maintenance.
 
“With the microinverter you can adjust each panel individually to adjust for shade or bright sun,” explains John Patrick, chief technical marketing officer. “This way you can extract up to 15 percent more power in shady conditions and five to 10 percent more power in normal conditions.”
 
eQED’s 250-watt HIKARI solar microinverter earned the company a NorTech 2012 Innovation Award in March. eQED is a partner company of Quality Electrodynamics (QED), a medical imaging company. Both are growing substantially. QED employs 87 people – up from 75 a year ago.
 
“We probably have five or six openings right now,” says Patrick. “eQED has 10 people, but that number will grow quite a bit as we commercialize the product.” eQED is in the final stages of development before sending it to market. Patrick says they expect to conduct testing on several hundred units later this year and begin commercial shipments in early 2013.
 
 
Source: John Patrick
Writer: Karin Connelly

cincinnati's budgetsketch charts projected expenses to tame overspending

“If you’re not paying for a service, then you’re the product,” says Bill Barnett, founder, BudgetSketch.

He should know – his product, which he describes as the antithesis of the popular budgeting website Mint, helps people plan spending in advance, rather than tracking dollars spent after the fact.

Like many of today’s lean startups and lean programmers, Barnett created the cloud-based BudgetSketch program for himself first, and tested it by rolling it out as soon as possible, then tweaking features and design for a layout that, he reports, currently gets rave reviews.

But why use BudgetSketch instead of the larger, more feature-heavy Mint?

“Most financial tools on the web are backward looking: what you’ve spent, what you’ve done, your history,” Barnett says.

He cites American consumers’ habitual overspending as evidence that tracking money spent doesn’t work. Instead, his program helps consumers shift their focus to planning future spending; if you don’t plan to spend money in a given category, you don’t spend it that month.

Talking to Barnett, it’s clear that he’d be a good financial advisor if he hadn’t chosen software programming as his second career (he was a mechanic for Delta Air Lines in years past).

He hates to watch today’s “get it now” spenders rack up extra expenses by purchasing over-budget items, and says he’s changed his own spending habits, driving older cars while saving enough to purchase new vehicles outright.

His advice for today’s hardship-driven spenders is offered in earnest.

“The solution to your problems lies in the future. If you keep doing what you’ve always done, you’re going to keep getting what you’ve always gotten. Change your future behavior you’re going to end up in a different place and, hopefully, a better place.”

By Robin Donovan

lakewood's ideation challenge helps winners turn good ideas into real startups

Startup Lakewood is looking for new businesses and the organization is willing to help entrepreneurs take their ideas to fruition. The second annual Ideation Challenge showcases the new ideas and new business startups that will add to the diversity of the Lakewood business community. 

“We think there are all sorts of people right here in Lakewood who have ideas for businesses but haven’t taken the steps to launch them,” says Mike Belsito, Lakewood’s entrepreneur-in-residence and director of the Ideation Challenge. “New businesses are important to the city, and this is one way to help people actually get started.”
 
Anyone with a business idea can submit an executive summary and a one- to two-minute elevator pitch for a chance to win a prize package that includes consulting, training and other resources for starting a new business. “The prizes will help the entrepreneurs take the next steps and take their ideas into reality,” says Belsito.
 
Two winners will be chosen -- one from Lakewood and one from Northeast Ohio. All entrants will receive feedback from Startup Lakewood. The competition is open to anybody, with the hope that the winners will start their businesses in Lakewood.
 
The deadline to submit executive summaries was recently extended to August 14. Startup Lakewood will then invite finalists by August 17 to make their elevator pitches on August 28 at University of Akron’s Lakewood Campus.
 

Source: Mike Belsito
Writer: Karin Connelly

toledo's aquablok develops low-permeability water seal with wide-ranging applications

After more than five years of research and development, Toledo’s AquaBlok has finally released its signature product, which has the same name as the company. The product has several purposes, including isolating contaminated sediments, acting as a nutrient management tool and water clarifier and serving as a seed delivery alternative for wetland plant restoration.

“AquaBlok provides a low-permeability ‘seal’ under water without any mechanical compaction or special equipment,” explains John Collins, general manager and chief operating officer. “You simply pour it through the water, and it creates an isolation layer that will minimize water flow or the spread of contaminants.”

According to Collins, AquaBlok is a patented composite particle technology that uses a central core, typically stone aggregate, to deliver various fine-grained coating materials for a broad range of environmental applications. The particles act as a delivery system, placing active ingredients through a water column or targeting locations apt to come into contact with water.

“It was successfully tested by the U.S. Environmental Protection Agency in a 2005 project under the Superfund Innovation Technology Evaluation program,” Collins says.

While there are competing approaches to AquaBlok, it’s a patented product and there are no directly competing products, he notes. “Primarily we offer ease of handling and simplicity. Other approaches can easily fail if materials are not handled or installed properly. Our products provide a consistent result without use of specialized equipment or materials.”

In 2007, AquaBlok introduced PONDSEAL.  “PondSeal was introduced as a companion product to AquaBlok,” Collins states. “Our objective was to have a product targeted more to pond and erosion related applications that would be sold more to individuals and general contractors rather than for larger environmental remediation projects.”

AquaBlok has 10 full- and part-time employees. The company received investments from two venture capital funds – Rocket Ventures in Toledo and the Ohio Tech Angels in Columbus – that are affiliated with the Third Frontier program.
 
Source:  John Collins, AquaBlok
Writer:  Lynne Meyer

edison welding institute sparks innovative approach to training welders

The Ohio Department of Development has seven Edison Technology Centers located around the state to provide a variety of product and process innovation and commercialization services to both established and early-stage technology-based businesses.

The Edison Welding Institute (EWI) in Columbus is one of those centers.

EWI recently launched a spinoff company – RealWeld Systems, Inc. (RWS) and unveiled its new product – the RealWeld Trainer.

“For about six years, EWI studied the problem of training welders,” explains Bill Forquer, RWS launch ceo. “It’s really hard to train welders effectively and efficiently. It’s a very skilled trade, and most of the training techniques involve an instructor looking over your shoulder and helping you properly position the torch, guiding the angle and advising how fast you should move. It involves a lot of hand eye coordination, as well as reading and interpreting the specifications for the kind of weld needed.”

The RealWeldTrainer provides the solution to the problem, Forquer says. “It’s the first and only training solution available that digitally records motions and objectively scores welding technique while performing real welds under production conditions.”

He likens the equipment to an airplane pilot simulator. “In the case of the RealWeld Trainer, however, the individual is actually welding,” he explains. “There’s a camera system that measures all your hand motions, angles and speed and records whether you’re using proper technique. It provides that data to you immediately on the screen after you’ve made a weld. It also provides consistency in training.”

He points out that, in addition to training, companies can use the equipment to screen welders before hiring them. According to Forquer, the RealWeld Trainer is state of the art. “It’s truly unique and has no competitors.”

The device costs $35,000, and potential customers include manufacturers who hire and train welders as well as vocational schools and labor unions who train welders. “We have half a dozen early adopter customers we’re working with right now who want to see how it works in their environment,” he notes.
 
Source:  Bill Forquer, RealWeld Systems
Writer:  Lynne Meyer

kent state university receives $3 million for nanoscale engineering project

Kent State University (KSU) is attempting to go where no project has gone before. In collaboration with AlphaMicron Inc. (AMI), Akron Polymer Systems (APS), Crystal Diagnostics (CDx), the Liquid Crystal Institute (LCI) and Kent Displays Inc. (KDI), KSU was awarded $3 million for its “New Concept Devices Based on Nanoscale Engineering of Polymer-Liquid Crystal Interface” project.

If it is successful, the research project could have very wide-ranging consumer benefit. “The project ultimately aims to develop consumer electronic products that make the life of ordinary people better, just like the liquid crystal TVs have positively changed our lives in a manner completely unimaginable 40 years ago," explains the Director of LCI, Hiroshi Yokoyama. He lists a slew of new inventions that could be generated by the end of the three-year project, including new electronic tablet capabilities.
 
“The $3 million grant was awarded under the Innovation Platform Program, one of the support programs run by the Ohio Department of Development under the umbrella of the Ohio Third Frontier,” adds Yokoyama. The grant will be used to hire research staff to form a dedicated team in each partner and to purchase necessary supplies.

Each of the project partners has a different goal. “In close collaboration with Kent State’s Liquid Crystal Institute, KDI will develop and commercialize the next generation Boogie Board [zero-power electronic notepad using liquid crystals] with narrower line and select erase capability," says Yokoyama.

AMI’s goal will be to perfect the optical clarity of the Special Warfare Electronic Eyewear program to meet the stringent specifications required by Navy SEALs in battlefield.
 
For CDx, Yokoyama explains they will “advance their strength in pathogen detection systems by developing a robust design of liquid crystal interface that allows them to manufacture the device by roll-to-roll process.” 

Meanwhile, APS will develop specialty polymers tailored for the target products of KDI, AMI and CDx with mass manufacturing compatible synthetic routes. “The LCI will work together with all of them to analyze their technical issues and develop solutions.”
 
Yet overall, the project aims to advance technology that may soon find its way into consumers' hands while also benefiting the environment. “We are looking into lighter, energy efficient, human and environment friendly electronics products, taking full advantage of liquid crystals and polymers.”


Source: Hiroshi Yokoyama
Writer: Joe Baur

cle-based organizations commit $4.6m to help small businesses expand

Several Cleveland-based funding organizations have gotten together and pooled their money to help small businesses that otherwise would not have access to the capital they need to grow.

Under the Economic Community Development Institute (EDCI), which officially announced the launch of its Cleveland office on July 17, the City of Cleveland, Cuyahoga County, Huntington Bank, U.S. Small Business Administration, Commission on Economic Inclusion, The Business of Good Foundation, and the Cleveland Foundation have committed $4.6 million in resources.
 
Micro-loans will account for $4 million of the fund while the remaining $600,000 will provide training and technical assistance for Cleveland small businesses. A 2011 study by Friedman Associates, a national firm specializing in microfinance, estimated a need of $38 million for loans under $50,000 in Cuyahoga County, with the greatest gap among minority-owned businesses.
 
“Neighborhood businesses who would not otherwise have access to capital will benefit from these loans,” says Daniel P. Walsh, Huntington northeast Ohio president. “These loans really stabilize neighborhoods with the capital to achieve the American dream. It will reinvigorate those neighborhoods that need reinvestment.”
 
The average loan is between $15,000 and $20,000. Eight area businesses have already benefited from loans through the program, totaling $163,000. ECDI started a similar program in Columbus in 2004 and has made $11.4 million in loans to 700 small businesses, creating or retaining 1,955 jobs.
 
The majority of businesses who will benefit from the loans are five employees or fewer, explains Bob Eckardt, executive vice president of the Cleveland Foundation. “There’s a pretty significant gap in this community and this will support a wide range of businesses,” he says. “We’re trying to do a big-picture thing. It’s important to support the entrepreneurs by getting them the funding they need to grow big or hire employees.”

 
Source: Daniel P. Walsh, Bob Eckardt
Writer: Karin Connelly

cintrifuse will offer developing startups room and tools to grow in cincinnati

When The Brandery launched in 2010, it put Cincinnati on the start-up map in a new way. Now a new initiative aims to put The Brandery, CincyTech and other start-up minded folks under the same roof with the goal of making that dot on the map bigger and more sustainable.

Innovators around the globe already see Cincinnati as a place to bring early-stage ideas and get expert help and access to their very first rounds of funding on their way to bigger, profitable futures.

In an effort to solidfy Cincinnati’s start-up ecosystem, the Cincinnati Business Committee announced a new approach: Cintrifuse, an initiative that will start with $55 million in corporate contributions targeted to support start-ups after their initial funds have been raised and as they refine and test their ideas and businesses. P&G’s global innovation officer, Jeff Weedman, takes his career on a new path as the leader of Cintrifuse.

"I would argue that it’s not a new initiative," says Weedman, a 35-year Procter veteran. He points to reports that Cincinnati is actually overdeveloped with seed-stage funding, thanks in part to years' worth of development and support work for tech start-ups. "This is an opportunity to take a lot of terrific work to the next level."

Many entrepreneurs start businesses here and love it—low cost-of-living expenses, access to top creative and professional experts and access to those very first grants and investments. Not to mention the arts, sports, education and amazing parks. But we digress.

But then reality sinks in. They welcome and need financial support through programs like CincyTech, which matches local private dollars with Ohio Third Frontier funding to make seed-stage investments in start-ups. But finding local sources for additional rounds of funding is a bigger challenge.

“It could become a valley of death for a start-up,” says Carolyn Pione Micheli, communications director for CincyTech, who has watched companies like ShareThis move away and companies like AssureRX, which remains in Cincinnati, find the money they need in Silicon Valley.

It’s only as start-ups enter their second and third money-raising rounds that they typically have products to show and market. If they can’t find support in Cincinnati to get them to that level, then they most often travel to the west coast and Silicon Valley, where consecutive rounds of funding are the norm, not the exception.

"The post-seed, pre-scale money is challenging," Weedman says.

Cintrifuse, which will initially be located on the first floor of the Sycamore Building at Sixth and Sycamore, has myriad spokes extending from its laser-focused hub.

“It’s just kind of sharing energy,” says Pione Micheli, who explains that the eventual home for Cintrifuse, the former Warehouse nightclub building on Vine Street,will eventually house CincyTech, The Brandery and offices for small start-ups as well as classroom space.

By eventually locating in Over the Rhine, near the under-construction Mercer Commons development, the hope is to bring more office workers into the expanding Gateway District of Vine Street. But for now, Weedman already has start-ups that have expressed an interest in sharing space with him on Sycamore.

He says the potential for Cincinnati to shine globally is clear with is existing population of consumer brand experts, creative professionals, wealth of medical research at Children's Hospital and underdeveloped patents at UC. "Why would any startup with a consumer focus anywhere in the world not want to come to Cincinnati?" he asks.

Big names in the CBC—names like Kroger, P&G, UC and Cincinnati Children’s Hospital and Medical Center—have pledged to support the effort financially, but Pione Micheli hopes they step up with partnerships as well as checks.

She sees Cintrifuse as a step toward a true start-up culture shift, one in which mistakes and failures are known as valuable tools for learning and growth, not death knells for start-up founders.

“It is a risk,” Pione Micheli says. “They are not all going to make it. As a region, we don’t have a good tolerance of failure.”

She notes that in Silicon Valley, investors see supporting a founder who has failed as a badge of honor. What entrepreneurs learned from prior bold ideas, the reasoning goes, they will apply in their next.

Maybe what Cincinnati needs is a little more room to fail, which provides, in turn, a lot more room to grow.

By Elissa Yancey
Follow Elissa on Twitter.

entrepreneurs pitch their ideas for a chance to be a part of shaker launchhouse accelerator

Twenty teams came to LaunchHouse on July 18 to pitch their business ideas for a chance to be accepted into the inaugural LaunchHouse Accelerator program and a $25,000 investment in their businesses at the Tech UnConference.
 
LaunchHouse received a $200,000 grant from the Ohio Third Frontier ONEFund to invest in startups. During the Tech UnConference companies presented three-minute pitches to a panel of Cleveland-area experts. Following the pitch session, companies then had the opportunity to demo their internet, technology or mobile app startup company.
 
The judges will select 10 companies for the accelerator. More than 50 companies applied for the chance to pitch. The chosen companies will then participate in a 12-week program, in which they will have experience-based lab sessions with one on one mentorship, and opportunities to network with successful entrepreneurs.
 
The program curriculum is very customer focused, says LaunchHouse CEO and founder Todd Goldstein. “The companies we select have to be very customer-centric,” he explains. “The entrepreneurs will develop their companies with their clients, so at the end of the 12 weeks they’ve identified who is going to pay for their product and accelerate their business.”
 
Goldstein describes the accelerator as a formalized approach to helping companies. “Up to this point, admission have been on a rolling basis and very informal,” he says. “This is a formalization of the years we’ve spent helping companies.”
 
The 12-week program will conclude with a showcase day, when the businesses will present to investors and venture capitalists. The 10 companies will be announced on Aug.8, with classes beginning Sept. 4.

 
Source: Todd Goldstein
Writer: Karin Connelly

crowdhall takes social engagement to next level with new online platform

A trio of tech entrepreneurs "from everywhere" are in Cincinnati to perfect a new online social platform that aims to transform large-group communication.

CrowdHall, set for a soft Beta launch within the week, allows a person or organization with a large group of followers to communicate with that group in a more organized way.

It works like this: a person -- like a politician, celebrity or blogger -- who has hundreds or thousands of online followers creates a profile on CrowdHall. Fans can ask questions that get voted on or followed by fellow fans. Questions that have the highest number of votes or interest get pushed to the top and the politician or celebrity can respond.

It sounds pretty simple, and that's the point, says CrowdHall co-founder and CEO Austin Hackett, who left New York's Columbia Medical School to perfect the site through The Brandery incubator here in Cincinnati.

"This is a platform that helps organize large audience communication. It gives people and organizations a real time list of what is on the minds of greatest number of people. It makes the whole two-way conversation more efficient," Hackett says.

The company has been in The Brandery program about four weeks, and co-founders Hatchett and
Jordan Menzel, along with developer Nick Wientge, came from different parts of the country to participate in the Brandery's 16-week program.

CrowdHall will be most valuable for those who have more than 20,000 followers, he adds.

"The current social tools are great for one-way communication. If Justin Bieber wants to deliver a message to millions of followers through Twitter or Facebook, it works. But when people talk back, it gets overwhelming. He can't respond to everyone, and it wouldn't be a good use of time," Hackett says.

Users connect to the site with their Facebook or Twitter accounts so they don't have to create a new profile. The service will debut free, but CrowdHall plans to unveil a paid, premium service in the future.

CrowdHall is an idea with local appeal. The company won the first Startup Pitch Wars at the inaugural Bunbury Music Festival. CincyTech and the Greater Cincinnati Venture Association sponsored the Pitch Wars that pitted 16 local startups against each other in a rapid fire pitch contest. CrowdHall won $1,000 and "a gaudy trophy."

Hackett is enjoying Cincinnati and the Brandery experience, but is unsure if he'll stay in the area once the program is over. He is open to it, however.

"It depends on which city supports us, and the level of partnerships and investment they provide. We are in Cincinnati and we are happy for now," he says.

By Feoshia Henderson Davis
Follow Feoshia on Twitter.

russian dandelion roots may give bounce to rubber production

The demand for natural rubber will exceed supply by 15 to 20 percent within the next five years, says William Ravlin, Ph.D., associate director of the Ohio Agricultural Research and Development Center of The Ohio State University.

“It’s not so much a case of diminishing supply as it is a sharply increased demand for rubber from China and India,” he explains. “The situation in the United States is one of national security, the economy and the growth of major corporations that depend on a sustainable approach to obtaining natural rubber.”

Rubber is used in a wide variety of products made in Ohio, and our traditional manufacturing economy relies upon its continued avaialbility. Slowly but surely, critical research is taking place to identify new sources for this material.

The Program of Excellence in Natural Rubber Alternatives (PENRA) was formally established in 2012 to help address this problem but, according to Dr. Ravlin, the founding members have been collaborating on it for the past five years. The founding members are Ohio State University, Oregon State University, Bridgestone America, Cooper Tire, Ford Motor Company and Veyance Technologies, an Ohio company. The United States Department of Agriculture, the University of Nevada, Reno and the University of Guelph in Canada are also collaborators.

Research scientists involved in PENRA have discovered that the roots of an unlikely candidate – the Russian dandelion – are able to produce rubber that’s comparable to rubber used today. Seeds from USDA expeditions in Uzbekistan and Kazakhstan have been planted in field plots and greenhouses in Wooster, Ohio.

There are many challenges, however. “Planting a huge amount of seeds only nets a small harvest of good ones, so it’s a time-consuming and ongoing process,” Dr. Ravlin notes. “Large amounts of the root material need to be processed at the front end to produce enough natural rubber for industries to conduct large-scale tests. Plus, the rubber must meet exacting standards. Airplane tires, for example, are made of 100 percent natural rubber.”

PENRA funding sources include a grant from the OSU Ohio Research and Development Center and the Third Frontier program, with additional support from Bridgestone America, Cooper Tire and Veyance Technologies.

“We have 20 senior research scientists, each with several employees, working on this project,” Dr. Ravlin says. “We’ve completed the construction of a pilot processing plant in Wooster, and we’re in the midst of a testing phase that’s progressing very well.”


Source:  William Ravlin, P.h.D., Ohio Agricultural Research and Development Center, The Ohio State University
Writer:  Lynne Meyer

zyvex technologies makes materials lighter yet stronger through nanotechnology

Lightweight yet strong.  Those two characteristics could come in mighty handy for a number of things.

Zyvex Technologies of Columbus knows a lot about making things lighter yet stronger.   It’s the first company to globally commercialize nano-enhanced products from carbon nanotubes. To the layperson, this innovation is part of a materials revolution that is helping to make stuff we use more fuel-efficient.

“A carbon nanotube is a tiny cylinder of carbon, just a few atoms wide and 1/50,000th the thickness of a human hair,” explains Mike Nemeth, director of commercial and defense applications. “Our product – Arovex – uses carbon nanotubes and carbon fiber together. It acts as a reinforcement for materials you mix it with.” He described Arovex like a fruit rollup.  “It’s a tacky sheet that customers can lay into molds and then make parts.”

Zyvex recently partnered with Pacific Coast Marine (PCM), a leader in marine closures, to develop a set of 30 doors, hatches and other closures for boats. “They’re all 66 percent lighter and eight times stronger than the standard ones,” says Nemeth. PCM recently debuted the items at a marine show with positive results.

“There’s a big demand for making things that are lighter and stronger, which can improve safety and fuel efficiency,” Nemeth notes. He lists the aerospace and automotive industries as examples. “It’s helpful for sporting goods, too. A good example is super lightweight mountain bike wheels. We have a new partnership to provide a bicycle rim specifically for downhill mountain biking.” 

Zyvex uses two Ohio manufacturers, one in Akron and one in Dayton, so its products are all Ohio made and assembled. Zyvex has 40 employees and received Third Frontier funding in 2009.
 
Source:  Mike Nemeth, Zyvex Technologies
Writer:  Lynne Meyer
 

burton morgan foundation announces grants to support entrepreneurship across northeast ohio

The Burton D. Morgan Foundation is taking significant steps towards making Northeast Ohio a hub for entrepreneurship. The foundation recently awarded $482,000 in grants to various organizations, including the Akron Urban League, BioEnterprise, Entrepreneurial Engagement Ohio and others that are dedicated to promoting entrepreneurship and entrepreneurship education throughout the region.
 
“The mission of the foundation is to strengthen the free enterprise system,” explains Deborah Hoover, President and CEO of the foundation. “We provide grants to organizations that support entrepreneurship education and activity among youth, college, students and adults, primarily in Northeast Ohio.”

The Austen BioInnovation Institute in Akron aims to accomplish just that with their $50,000 grant to support internships in 2012-13 for graduate-level students to assist with assessment, development, and commercialization of novel biomedical technologies. The Hudson-based foundation also renewed their support for Lemonade Day, which targets young people and exposes them to entrepreneurship, granting $20,000 to support the 2013 effort.
 
According to the foundation's website, “Lemonade Day is a free, community-wide program dedicated to teaching children how to start and operate their own business through the simple act of creating and running a lemonade stand."

“This year, more than 1,500 children have participated in the program, creating and operating lemonade stands with the support of a national curriculum design by Prepared4Life, which is based in Houston,” says Hoover, who believes you can never start a career in entrepreneurship too early. “Through Lemonade Day, parents and teachers have become engaged in the larger dialogue around the importance of financial literacy and entrepreneurship education.”
 

Source: Deborah Hoover
Writer: Joe Baur

dayton's applied optimization is expanding and growing revenues

Dayton’s history of innovation continues with Applied Optimization, an engineering research and development firm. Since 2009, the company has grown revenues by 56%, hiring additional employees and leasing additional space. Their string of successess has allowed them to take on new, exciting projects.
 
Applied Optimization is focused on space sciences and advanced manufacturing. It hearkens back to the city’s Rust Belt lore with a 21st century feel. Its team of engineers and computer scientists has worked on a variety of aerospace projects, including Boeing LTS, Rolls Royce, Phantom Works as well as government organizations, such as the Missile Defense Agency.
 
Principal Scientist Dr. Anil Chaudhary has been with the downtown R&D organization since he started the company in 1995. He attributes the company’s success to a simple mantra: “Do good work and keep your promises.”
 
Unsurprisingly, working in the city that gave us flight has had a special impact on Chaudhary, who came to the United States to continue his education after receiving his bachelor of technology from the Indian Institute of Technology, Bombay in 1977. “Dayton offers unique, first-hand opportunities to interact with scientists who are on the forefront of technological developments,” he explains. “It is an important plus.”

Recently, Chaudhary began work on 3-D printing of metallic parts. "The goal is to be able to produce a small batch of parts economically. This is particularly relevant for aerospace applications where the lot sizes are typically small. The work we do are research programs sponsored by the Air Force, Navy and the Army. We also provide commercial support to the aerospace industry."

Given their progress, Chaudhary predicts continued success “as long as we always remember why the customers gave us work in the first place.”


Source: Dr. Anil Chaudhary
Writer: Joe Baur
339 Entrepreneurship Articles | Page: | Show All
Share this page
0
Email
Print